Home | Wood | Stoker | Optimizer | FAQ | Accessories
Testimonials | News | Calendar | Dealers | Hot Spots

Portage & Main Outdoor Water Furnaces
Go ahead - Please compare us with the rest.      You'll find Portage & Main Outdoor Water Furnace - Simply the Best!

Now Available --WOW IS WHAT YOU ARE GOING TO SAY WHEN YOU SEE THE

PORTAGE & MAIN WOOD GASIFICATION UNIT IN ACTION

THE OPTIMIZER 200 GASIFIER

Watch wood gasification, reaction in action on the video.

Watch Optimizer 200 Video--Click Here

 

Portage & Main Outdoor Water Furnace Optimizer 200
The Portage & Main Optimizer 200 uses a process called wood gasification resulting in highly efficient combustion in the furnace's dual burn chambers. Wood in the firepot burns from the bottom up, drying the top layer of wood in the firepot. Gases and exhaust are forced into the lower burn refractory brick lined chamber where gases are burned at temperatures of 2000 degrees plus. (Varies based on the fuel type, burn rate and other conditions). Maximum heat extraction is achieved as the gases pass through one vertical pass and two horizontal reverse return passes. ( This is the most efficient design of boilers 150 years ago and is still the most efficient design today.) Optimal heat extraction save both work and cost involved with wood.

The optimal refractory brick lining in both burn chambers results in high burn chamber temperatures for consistent proper gas combustion. The high temperature gas combustion significantly reduces emissions, prevents creosote build-up and minimizes ash build-up in in the unit. The exhaust air passes through the burn chamber then escapes through multiple flues running through the water jacket,heating the water quickly and efficiently. The Optimizer 200 incorporates the existing features of the conventional Portage & Main Wood Unit--longevity, reliability, and efficiency and adds great features to the Optimizer 200 Gasifier.

 

Portage & Main Optimizer 200 Features Include:

  • Large pre cast heat treated refractory brick target reaction area to withstand the extreme heat of the gasification process.
  • Re-action chamber has a large and extensive amount of heavy duty pre cast heat treated refractory brick target area incorporated into the refractory brick base. Built to last.
  • Refractory brick combustion nozel vs steel plate.
  • All extreme heat areas are pre cast heat treated refractory brick lined or water cooled.
  • Anti-bridging design.
  • Water cooled lower combustion reaction area allows for maximum heat transfer into the water jacket. This is where the extreme heat is extracted. (See Video)
  • Water completely surrounds the firepot.
  • Digital controls accurate to within one degree. Controls can be easily mounted in the home/building.
  • Rounded firepot top with air injected from top for even turbo burn.
  • Heavy duty removable grates made of 3/8" plate metal with 1" rods.
  • Combustion chamber is pre cast heat treated refractory brick lined 15" wide x 40" length and 2" deep (not small light brick)
  • Pre-cast heat treated refractory brick retains heat for ensured gasification upon restart. Keeping heat in during the off cycle enables fast start of secondary burn.
  • The pre-cast heat treated refractory brick has air injection ports on both sides of the firepot for super hot turbo burn.
  • Strong quality fan motor introduces air into air distribution box.
  • Easy access door with safety latch.
  • Commercial quality boiler grade long lasting gasket maintains a positive seal.
  • Easy accessible doors make cleaning of fire tubes and ash removal easy.
  • Two hinged doors with lockable paddle type latch provides easy convenient assess to large pump install area. Also houses combustion blower and digital controls to prevent weather damage.
  • Very well insulated using R20 quality insulation which will not break down, crack, seperate, burn or cause rust on the outside of the water jacket.
  • 10 year limited water jacket and burn pot warranty

 

Portage & Main Outdoor Water Furnaces Have Been Providing
Warmth and Comfort For Families and Businesses Since 1973

After over 30 years of manufacturing the best designed, most efficient conventional wood outdoor water boiler, we are Pleased to introduce the Optimizer 200 Gasifier built with the same quality innovated design and time proven concepts that have been around for almost 200 years.

 

Optimizer 200 Specifications  
Maximum Furnace Output (BTU/Hour) 180,000
Heating Area (sq. ft.) 2,000 - 6,000
Total Width x Total Depth X Total Height 47" x 66" x 81"
Shipping Weight (pounds) 2,800
Chimney Size 6"
Door Size (w x h) 18" x 20"
Firepot (w x h x l) 10 cubic feet ~32" x 26" x 28"
Water Capacity (~ US gals) 220
Horizontal Fire Tubes 1.5"
Vertical Fire Tubes 2"
Maximum Log Length 26"
Split Wood or Suggested Log Diameter 3" to 6"
Limited Warranty 10 years

 

Key Benefits

  • EPA best test results has maximum burns of 94% efficiency.
  • Approved EPA phase two requirements. White tagged.
  • Virtually smoke free
  • Qualifies for IRS tax benefits

[ return to top ]


Home | Wood | Stoker | Optimizer | FAQ | Accessories | Testimonials
News | Calendar | Dealers | Hot Spots | Site Map 

Phone: 1-306-922-1722 or 1-800-561-0700 Fax: 1-306-922-1662
Address: R.R. 5 Site 16 Comp 114, Prince Albert SK, S6V 5R3
Contact: bmartin@sasktel.net

Copyright 2005-2009 by Portage & Main Outdoor Water Furnaces.